4.2.3.3 Loading a Configuration from USB
To load a configuration from the connected USB stick, select Manage
Configuration/Load Configuration from USB.
Note: The selected configuration is applied but not stored on the unit.
4.2.3.4 Saving a Configuration to USB
To save the current configuration of the unit to the connected USB stick, select
Manage Configuration/Save Configuration to USB.
Note: Entries already containing a stored configuration cannot be overwritten.
Choose an entry with <empty slot> label to save the configuration.
4.2.3.5 Importing Configurations from USB
To import all the configurations stored on the USB stick, select Manage
Configuration/Import Configuration/Import All Configurations.
To choose some configurations on the USB stick to import, select Manage
Configuration/Import Configuration/Select Configuration to Import. The
selected items are marked with '>', and can be imported by selecting the Import
Selected Configurations command.
Configurations can also be imported one by one by selecting Manage
Configuration/Import Configuration/USB Config <n>.
4.2.3.6 Exporting Configurations to USB
To export all of the configurations stored on the unit, select Manage
Configuration/Export Configuration/Export All Configurations.
To choose some configurations on the unit to export, select Manage
Configuration/Export Configuration/Select Configuration to Export.
The selected items are marked with '>', and can be imported by selecting Export
Selected Configurations.
Configurations can also be imported one by one by selecting Manage
Configuration/Export Configuration/Device Config <n>.
4.2.4 Rotary Knob
The rotary knob is used for scrolling in the menu system, moving the cursor or
stepping attribute values. The knob also serves as a push button and performs the
same function as the Select key.
To Next Page
Loading...
