Figure 6.13 Audio Components Tab
6.14.2 Configuring Thresholds for PID Monitoring
The PID monitor checks for both continuity count errors and for missing PIDs, for the
PIDs on which it has been enabled. Both conditions have parameters which may be
adjusted for different levels of error tolerance in the environment in which the AVP
4000 has been deployed.
The parameters are common to all PIDs being monitored. They may be found by
navigating in the web GUI to Service Configuration > Outputs > IP or ASI >
Transport Stream > Service, and viewing the Properties of that selected Service,
as shown in Figure 6.14.
To Next Page
Loading...
