1. Navigate to the Support page.
2. In the Log files widget on the General tab, click on the Download Logs and
Status.
3. In the popup window, select the Save file option.
4. By default, the unit will save the log file to the Downloads folder on your
computer.
8.8 Saved and Exported Configurations
The configurations can be extracted from the unit in two xml formats:
• One format is obtained from the unit by exporting from the Stored Configurations
page. This is often referred to as Exported Configuration.
• The other format can be saved from the Support page. This is often referred to
as Saved Configuration.
8.8.1 Exported Configuration
The exported configuration has a format that is used by the unit to efficiently store
unit settings among the pre-stored configurations. This is a compact description in
xml format, and contains only the most important attributes.
Getting the Exported Configuration from the unit
To get the exported configuration, do the following:
1. Navigate to the Stored Configurations page.
2. In the Stored Configurations widget, select the configuration you want to
export. Its name and description will appear in the Configuration Workbench
widget.
3. Click on the Export button, and save the configuration to the local disk of the
control computer.
Reloading an Exported Configuration to the unit
Any configuration exported can be easily reloaded to the unit from the Stored
Configurations page.
Note: Only an exported configuration can be reloaded to the unit using this
method.
For this, do the following:
1. Navigate to the Stored Configurations page.
2. Select an empty slot in the Stored Configurations widget.
To Next Page
Loading...
