Table 5.2 Stored Configuration Parameters
Parameter Description
Restore
Restores the configuration from the selected stored onto the unit. Select required stored number and press
Restore
Save Config
Saves the current unit configuration into the selected store location. Select required store number, enter Name
and Description and press Save Config
Delete Delete contents, name and description of selected store. Select required store number and press Delete
Browse
Selection of a file stored on the external computer on which the browser session is being run. Used in
conjunction with Import.
Import
Imports a configuration from file to selected store location. Browse to required file and select Import. This does
not affect unit configuration.
The file being imported must be in the same format (ie exported from the stored configurations function rather
than the save-load XML
Export
To export the selected configuration to a file, move the mouse pointer over the link, right click and select Save
target as... or Save link as..., dependent on the browser you are using. You will then be prompted for a filename
and a place to store the file. Give the file a .xml extension.
Update Properties Refreshes the contents of the list and the workbench from the unit.
5.3.2.2 Restoring a Configuration
The unit provides 64 configuration slots for storing different configurations.
Configurations can be restored at any time. To restore a previously stored
configuration, do the following:
1. In the Stored Configurations widget, select the configuration you want to
restore.
2. The Configuration Workbench widget will display the properties of the selected
stored configuration.
3. To restore the configuration, click the Restore button in the Configuration
Workbench widget.
5.3.2.3 Exporting a Configuration
The unit provides 64 configuration slots for storing different configurations. The
content of any of the slots can be exported. Exported configurations from a previous
version of the unit can be fed to the Configuration Converter Tool and converted
to the current version. To export a previously stored configuration, do the following:
1. In the Stored Configurations widget, select the configuration you want to
restore.
2. The Configuration Workbench widget will display the properties of the selected
stored configuration.
3. To export the configuration, click the Export button in the Configuration
Workbench widget.
4. In the popup window, select the Save file option.
5. The location of the downloaded file will depend on your browser settings.
To Next Page
Loading...
