E.1 Logo Creation
Logo Creator is an application for creating OSD-format files from bitmap files and
modifying previously saved OSD files. It has the facility to introduce a transparency
component into the image so that some areas appear transparent when the image is
superimposed onto video. This transparency can be added manually or by loading a
separate Key File. The application also includes the facility to downsample the
image to the desired size. It can then be used to position the image on a screen of
the specified resolution and select if the image should fade in. The application runs
under Windows XP, Windows Vista or Windows 7 on an ordinary PC.
E.2 Logo Creator Installation
The application runs under Windows XP, Windows Vista or Windows 7 on an
ordinary PC.
The PC requires the .NET framework to be installed, this is available from the
following location:
https://www.microsoft.com/en-gb/download/details.aspx?id=17718
To install Logo Creator:
1. Double-click the Logo Creator Installer.msi file.
2. If required at the prompt, click Run.
3. Click Next at the prompt.
4. Select Browse to change the default installation location.
5. Click Next to complete the installation.
E.3 Using Logo Creator
The steps for creating an OSD file are:
1. Load a .BMP file.
2. Downsample to the desired size.
3. Create transparency in the desired areas.
4. Select the screen resolution it is to be displayed in.
5. Select if the image should fade in.
6. Position the image on the screen.
7. Save as an .OSD file. Only Type 6 OSD files are supported on the EI9001 and
EI9001T.
To Next Page
Loading...
