5.3.1.2 Configuration Workbench Widget
The Configuration Workbench widget displays the information about the slot
selected in the Stored Configurations widget. Moreover, it lets the user overwrite,
restore, delete or export the configuration in the selected slot.
Figure 5.15 Configuration Workbench Widget
Note: The format of the files exported through the Stored Configurations page is
not compatible with the format of the configurations saved on the Support
page.
5.3.2 Using the Stored Configuration Page
This section describes the tasks that can be completed on the Stored Configuration
Page.
5.3.2.1 Storing the Current Configuration
The unit provides 64 configuration slots for storing different configurations.
Configurations can be saved at any time. To save the current configuration, do the
following:
1. In the Stored Configurations widget, select the slot you want to use for storing
the configuration. If the slot is not empty, it will be overwritten.
2. In the Name field in the Configuration Workbench widget, enter a name for the
configuration.
3. You can also add a description in the Description field if you wish. The
description can help identifying the configuration in the future.
4. Click on the Save Config button within the Configuration Workbench widget.
5. A confirmation dialog will appear. Choose Yes to save the configuration in the
selected slot.
Once stored the configuration is available to be recalled and used at any time. The
table below describes each main action associated with the stored configurations.
To Next Page
Loading...
