4.4.1.4 Alarms Menu
The Alarms Menu displays the alarm settings available on the unit.
4.4.1.5 Shortcuts Menu
The Shortcuts menu displays the shortcuts available on the unit.
4.4.1.6 Unit Config Menu
The Unit Config Menu displays the device settings. The menu options are shown in
Table 4.7.
Table 4.7 Unit Config Menu
Unit Config
Remote Control Setup
IP Address The IP address of the unit for upgrade or web control.
Subnet Mask The subnet mask associated to the IP address set.
Gateway Address The gateway through which the unit can be accessed.
Display Setup
Video Monitor Input Displays a list of available sources
Video Monitor Parameters
Video Monitor Brightness 0 – 8 Adjusts the brightness of the monitor
Video Monitor Usage Time Displays the monitor usage time (measured in hours)
Video Monitor Preview Time
Duration that the monitor will be active from the time the on button is pressed (measured in
seconds)
Audio Monitor Input
Audio Slot Select Selects the slot from which to monitor a channel on the front panel.
Audio Channel Select
Selects the channel from the slot selected in Audio Slot Select and the module set in Audio
Module Select for displaying on the front panel.
Audio Module Select Selects the module from the slot selected in Audio Slot Select.
Menu Display and Keypad
Keypad Lock Time The timeout time in seconds after which the keyboard gets locked.
Keypad LED Brightness The brightness of the keys in the keypad.
Display Test Starts a test pattern on the display to verify correct operation.
TND Test Starts a test on the TND to verify correct operation.
Carrier ID Setup Carrier identifier.
DVB CID Global Unique Identifier Displays a unique ID for the carrier ID.
Operator Enables selection of an operator.
To Next Page
Loading...
