Figure 3.11 Viewing (Unsaved) Output Services (1 Linear and ABRs Shown)
3. Click on Apply All to save your configuration to the unit, and to set your
Transport Streams to online (this can be done quickly for all Transport Streams
by selecting each one with CTRL pressed and then clicking Online once).
Your encoded/transcoded services are now able to be output to multiple screens
with multiple profiles.
3.7.6.4 Multi-screen Licensing Requirements
Video Licenses for ABR
ABR is a licensed feature and the chassis must have one AVP/SWO/ABR/SD
license and optionally one AVP/SWO/ABR/HD license installed for each ABR
service.
In addition, at least one HD MP4 video license is required for each Decode/Encode
card, and suitable video licenses are required for any services being generated on
additional broadcast cards.
Audio Licenses for ABR
Up to four audio components are available, and are re-used across all ABR outputs,
with the restriction that each ABR output can have up to two audio components
associated with the output. Up to four audio components configured with the same
settings are covered by one encode license.
To Next Page
Loading...
