Figure 3.10 Adding Additional Output Services
2. A sub-menu displays various options for adding further output services. The
interface will only allow you to add services that the unit supports. Non-
selectable options are greyed-out.
Notes: Each option card can only support a single type of codec. This means that
depending on how your primary encode is configured, only certain options
are displayed.
The On Same Card option enables a PiP service to be added (only relevant
for H.264). On a card with the Broadcast role, the On Same Card option
also enables a secondary SD service.
The Adjacent Card option enables the adjacent Broadcast Card to be
configured to generate a main service (HD or SD) and a secondary SD
service.
The ABR Service option creates a fixed list of profiles which run on an ABR
Card. This option is only available when you right-click on a card with the
Decode/Encode role. Once created, these profiles can be edited in a similar
way to other standard services and outputs. ABR profiles and individual
components can be removed from the list by right-clicking and selecting
Delete from the displayed menu.
To Next Page
Loading...
