Ericsson AVP 4000 - Manage Configuration Menu

Front Panel Control
1/1553-FGC 101 1790 Uen Y
4-9
Menu Item Description
Unit Config Device settings
Advanced Access to full functionality of the AVP and the installed option cards
Sub Menus are listed in the following tables.
4.4.1.1 Manage Configuration Menu
The Manage Configuration Menu is used for saving, loading, exporting and
importing configurations. The menu structure is shown in Table 4.4.
Table 4.4 Manage Configuration Menu
Manage Configuration
Load Configuration
Delete All Configurations
from device
Deletes all the configurations previously saved on the unit.
Config <n>: <config name> Selects the configuration to load from the configurations saved on the unit.
Save Configuration
Config <n>: <name>
Saves the current configuration to the unit. Only slots labeled <empty slot> can be selected. Other
slots are read only.
If an individual stored configuration needs to be deleted, select the required memory slot and press
the Del key.
Load Configuration from USB1
Delete All Configurations
from USB
Deletes all the configurations stored on the USB stick.
Config <n>: <name>
Lists the configurations stored on the USB stick connected to the front panel. The selected
configuration is loaded and becomes the current configuration, but is not stored in any of the slots in
the unit.
Save Configuration to USB
1
Config <n>: <name>
The list of configurations stored on the unit. The selected configuration is saved to the USB stick
connected to the front panel.
Import Configuration
1
Import All Configurations
Imports all the configurations stored on the USB stick and saves them on the unit. None of the
configurations becomes active.
Select Configurations to
Import
Import Selected
Configurations
Imports the selected configurations and stores them on the unit. None of the configurations
becomes active, they are only stored on the unit.
USB config <n>:
<name>
The list of configurations stored on the USB stick. The configurations to be imported can be selected
by pressing the Select button on the keypad.
USB Config <n>: <name>
Imports one particular configuration from a USB stick. The imported configuration does not become
active.
Export Configuration
1