3. Select DVB subtitle component from IP input, and drag onto encode service,
selecting pass-thru.
Figure 3.33 Encode Services – Selecting DVB Subtitles Component
Figure 3.34 Encode Service – Enabling Subtitles Pass-thru
3.7.15.2 How to Reposition DVB Subtitles
DVB subtitles may, alternatively, be repositioned.
1. Set up the output service, according to section 3.7.5. or section 3.7.10
2. If the output service is an encoding service (and not transcoding), then set up IP
input according to section 3.7.10 paragraphs 6 and 7.
3. Select the required DVB subtitle component from the IP input, drag onto the
encode service and select Reposition.