Figure 4.3 Typical Screen Displayed on Power-Up
4.3.1.1.1 Title Bar
Alternately displays the current location within the menu tree and the recently loaded
configuration. If the loaded configuration was changed in any way, the '(changed)'
string is appended to the name.
4.3.1.1.2 Active Area
The active area is used for:
• Displaying the IP address and status information about the active streams
• Displaying the menu system
• Displaying parameter setting
4.3.1.1.3 Audio Monitor
A selected audio input can be monitored. To select an audio input for constant
monitoring, navigate to Unit Config/Display Setup/Audio Monitor Input and set
the slot and channel parameters.
4.3.1.1.4 Audio Input Monitor
On the Audio Input Monitor Screen, see Figure 4.4, all the encoded channels from
an option card can be displayed.
Figure 4.4 Audio Input Monitor Screen
The entire audio input range for an encoder card can be monitored by selecting the
AV Encoder/Audio Monitor menu. The rotary knob can be used to switch between
Channels 1-8 and Channels 9-16 on each card.
To Next Page
Loading...
