Parameter Values Description
Black Switches to a black test pattern on loss of video input.
Color Bars Switches to a color bars test pattern on loss of video input.
No PID The video PID no longer transmitted. SI is not updated.
Slate Switches to the full Slate uploaded by the user.
Adaptive Pre-
processing
On, Off
Input filter to prevent excessive blocking, if the license
enabled.
MCTRF Off, Default, Strong.
Available with the AVP/SWO/SD/PREMIUM or
AVP/SWO/HD/PREMIUM.
Horizontal Bandwidth 30 to 100% Sets the video horizontal bandwidth filter.
Half Line Removal Off, On
Enables or disables the removal of black half lines at the
top of the picture by substituting video data from adjacent
lines. The option is available when Video Input Format is
set to SD 576i25.
Logo
Logo file
The file to use as a logo. The selected file can be
uploaded by selecting the Upload option.
Logo insertion Off, On
Controls if logos are displayed or not. The file to use can
be selected under Logo file.
A fixed logo position? On, Off
Controls whether to use the default position for overlaying
the logo on the video.
If On, the position of the logo is fixed according to the
position held within the logo file.
If Off, the position of the logo is determined by the
coordinates entered in the X and Y position boxes.
The X position of the
logo
The position relative to left of the screen 0 (number of
pixels per video line - logo width - 1). If an invalid position
is specified, a logo display alarm will be generated.
Displayed only if a fixed logo position is set to Off.
The Y position of the
logo
The position relative to top of screen 0 (number of video
lines - logo height - 1). If an invalid position is specified, a
logo display alarm will be generated. Displayed only if a
fixed logo position is set to Off.
Slate
Slate File
The file to use as a Slate. The selected file can be
uploaded by selecting the Upload option.
Advanced Slate Display Options
Freeze Frame
Detect Off, On
Disables or enables delayed slate display upon detection
of frozen video frames. The feature uses hysteresis delays
defined next.
Time Threshold
Before Slate
seconds
The video component must be frozen for approximately
this number of seconds for the slate to be triggered by this
feature. A specific alarm is also raised while a slate is
displayed for this reason (see section 6.6.2.1).
Time Threshold
Before Recovery
seconds
The Freeze Frame condition is removed after this number
of seconds with active video. Please note: the slate may
remain on display for other reasons.
To Next Page
Loading...
