Parameter Values Description
Action on AFD Code
0000
Convert as anamorphic and put AFD code 1000
out.
Convert as specified in Default and put AFD
code out.
Specifies what aspect ratio conversion is performed if the
AFD code on the input is code 0000, which is a reserved
code.
AFD Sustain
Maintain previously received AFD code
indefinitely.
Maintain previously received AFD code for
period specified in Sustain Timeout, then drop to
default, i.e. code 1000.
Maintain previously received AFD code for
period specified in Sustain Timeout, then switch
AFD off.
Specifies what AFD is signaled on the output when the
AFD is no longer present on the input.
AFD Sustain Timeout 0, 1, 2, 3, 4, 5,10, 20, 50, 100, 120 Control how long previous AFD code is maintained.
0 means drop to default immediately on loss.
1
Only applicable for SD input.
2
Only applicable for 576i25 input.
3
Only applicable for 480i2997 input.
Video Encoding
The following parameters are available on the Encode tab of the Properties widget on the
Service Configuration page when a video component is selected in the Outputs widget.
The same parameters can be accessed through the Advanced/EI9001/Video/Video
1/Video/Main Video/Video Encoder menu on the front panel.
Table 5.8 Main Video Encoding Parameters
Parameter Values Description
Profile SD MPEG2 Main Profile Main Level 4:2:0 8 bit
SD MPEG2 4:2:2 Profile Main level 4:2:2 8 bit
SD H.264 Main Profile Level 3.0 4:2:0 8 bit
SD H.264 High Profile Level 3.0 4:2:0 8 bit
SD H.264 High Profile Level 3.1 4:2:0 8 bit
SD H.264 Hi422 Profile Level 3.1 4:2:2 8 bit
SD H.264 Hi422 Profile Level 3.1 4:2:2 10 bit
HD MPEG2 Main Profile High Level 4:2:0 8 bit
HD MPEG2 4:2:2 Profile High level 4:2:2 8 bit
HD H.264 Main Profile Level 4.0 4:2:0 8 bit
HD H.264 High Profile Level 4.0 4:2:0 8 bit
HD H.264 High Profile Level 4.1 4:2:0 8 bit
HD H.264 Hi422 Profile Level 4.1 4:2:2 8 bit
HD H.264 Hi422 Profile Level 4.1 4:2:2 10 bit
Sets the encoder profile. The profile will also affect the
allowed bit rate range.
Resolution
352 x 576, 480 x 576, 528 x 576, 544 x 576, 640
x 576, 704 x 576, 720 x 576, 352 x 480, 480 x
480, 528 x 480, 544 x 480, 640 x 480, 704 x
480, 720 x 480, 1280 x 720, 1440 x 1080, 1920
x 1080
Defines the horizontal and vertical resolution of the
encoded video. The available options depend on the
values set for Video Input Format and Video Profile.
Buffer Mode CBR Constant Bit Rate operation.
Seamless
Sets a mode in which a change in video bit rate parameter
does not cause an interruption in the output stream.
To Next Page
Loading...
