Video Encoding
The following parameters are available on the Encode tab of the Properties widget on the
Service Configuration page when a video component is selected in the Outputs widget.
The same parameters can be accessed through the Advanced/CE-HEVC/Video/Video
1/Video/Main Video/Video Encoder menu on the front panel.
Table 5.35 Video Encoding Parameters
Parameter Values Description
Video Profile Profile Off,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0 8 bit,
HD H.264 Main Profile Level 4.0 4:2:0 8 bit,
HD H.264 Main Profile Level 4.1 4:2:0 8 bit,
HD H.264 High Profile Level 4.0 4:2:0 8 bit,
HD H.264 High Profile Level 4.1 4:2:0 8 bit,
HD H.264 Hi422 Profile Level 4.0 4:2:2 8 bit,
HD H.264 Hi422 Profile Level 4.0 4:2:2 10 bit,
HD H.264 Hi422 Profile Level 4.0 4:2:2 8 bit,
HD H.264 Hi422 Profile Level 4.0 4:2:2 10 bit,
HDp50/59.94 H.264 High Profile Level 4.1 High Tier 4:2:0 8 bit,
HDp50/59.94 H.264 High Profile Level 4.2 High Tier 4:2:2 8 bit,
HDp50/59.94 H.264 Hi422 Profile Level 4.2 High Tier 4:2:2 10 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0 8 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0 10 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:0 8 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:0 10 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:2 8 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:2 10 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:2 8 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:2 10 bit,
HDp50/59.94 HEVC Main Profile Level 4.1 High Tier 4:2:0 8 bit,
HDp50/59.94 HEVC Main Profile Level 4.1 High Tier 4:2:0 10 bit,
HDp50/59.94 HEVC Main Profile Level 4.1 High Tier 4:2:2 8 bit,
HDp50/59.94 HEVC Main Profile Level 4.1 High Tier 4:2:2 10 bit,
UHD HEVC Main 10 Profile Level 5.1 High Tier 4:2:0 10 bit,
UHD HEVC Main 10 Profile Level 5.1 High Tier 4:2:2 10 bit
Sets the encoder profile. The profile will
also affect the allowed bit rate range.
Profile for HD input Profile Off,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0 8 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:0 10 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:0 8 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:0 10 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:2 8 bit,
HD HEVC Main Profile Level 4.0 High Tier 4:2:2 10 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:2 8 bit,
HD HEVC Main Profile Level 4.1 High Tier 4:2:2 10 bit
The profile to set when an SD input is
detected on the SDI input. Visible only if
Input Detection is set to Auto Detect
and Configure. If this option is visible,
the Video Profile cannot be set
manually.
To Next Page
Loading...
