Table 3.7 VLAN Creation Options
Parameter Values Description
Vlan ID (Create) 2-4094 New VLAN ID to create.
Vlan IP xxx.xxx.xxx.xxx
VLAN IP Address (VLAN tagged Transport Stream will have
this as its source IP address).
Vlan Netmask yyy.yyy.yyy.yyy VLAN Netmask.
Vlan Gateway zzz.zzz.zzz.zzz VLAN gateway address for the current VLAN.
Vlan Priority 0-7
Quality of service can be controlled by setting the VLAN
priority. A higher number has higher priority for services
sharing a transport stream and por.
Note: The VLAN ID and its IP address must be unique across all Ethernet
interfaces.
VLAN Tag Sharing
Once the VLANs are created, they can be assigned to IP Transport Streams. To do
that, navigate to the Service Configuration page, and create a Transport Stream
for the appropriate IP output. Then, click on the newly created Transport Stream,
and in the Properties widget select the required VLAN tag. VLANs can also be
assigned to Transport Streams in the Outputs/IP Output <m>/Data Interface
Group <n>/Transport Stream ID: <id>/Destination List/Destination <k>/Vlan
Tag front panel menu. The following options can be set:
Table 3.8 VLAN Tag Sharing Options
Parameter Values Description
Vlan Tag None, existing VLAN tag
Disables VLAN tagging or assigns the selected VLAN tag to
the current Transport Stream.
Vlan Priority 0-7 Priority that can be used to support QoS.
It is also possible to group multiple Transport Streams under the same VLAN. To do
this, assign the same VLAN tag to all of them.
Note: VLANs can be managed through the Service Configuration page (on the
web GUI) by clicking on the Manage button next to the Vlan Tag parameter.
VLAN Deletion
A VLAN can be deleted by changing the VLAN Tag parameter under the Transport
Stream to None. If a VLAN tag used by any Transport Stream is deleted, the VLAN
Tag parameter is set to None in the respective Transport Streams.
To Next Page
Loading...
