28 Controlling Your Lighting System
Lamp On: Turns on the fixture's lamp. Also known as striking the lamp.
Lamp Off: Turns off the fixture's lamp. Also known as dousing the lamp.
Reset: Resets the lamp commands.
Parameter, Home
Sends all parameters of the selected lights to their home positions. The home positions are pre-recorded in
the patching personality files, and may not be changed by the user.
Generally, parameters home to useful settings. For instance, pan and tilt will be set to mid-way values.
Gobos and beam control will be set so that the beam is unobstructed and visible.
To Next Page
Loading...
