Recording Your Looks For Playback 33
To record Media, run the media on the media screen (or from another source, for instance a playback car-
rying the desired media). You will see an option to include the running media when the cue is recorded.
Note: If you want a media clip to continue across several cues just record the same clip in each
cue. Clips repeated in consecutive cues do not re-start, they continue to run.
Each cue may be named, and its In, Out and Wait times set.
Note: The wait time commences at the start of the cue. If wait is shorter than either in or out,
the in or out will not complete before the next cue starts.
Wait time = 0 is a special case and causes the cue to wait for a manual press of the GO button.
Include Options
When recording to a playback, cue, or sequence step, you may specify which lighting channels, sets of
parameters, and media are included in the recording by pressing the Include Options button.
Channels:
Active: Only channels with an intensity above zero are included.
Selected: Only channels currently selected (surrounded by a green box on the stage map or brightly
lit on the bumps) are included.
All: All channels are included.
Include:
Intensity / Color: Only the intensity and color mixing channels are included.
Position: Only the position (pan/tilt) channels are included.
Beam: Only the beam channels are included (beam includes non-fadable colors such as wheels and
scrollers).
If any media is playing, you will have the option to include it in the recording.
Store
The current lighting levels will be stored in the selected cue or sequence step and recording will be com-
pleted. The recording mode is then closed, and normal operation resumes.
Note: Once a cue is recorded, it is placed on the live side of the cue crossfader and sent to the
output. To remove the newly made cue take the cues master down. The cues master allows cues
to be made as changes (deltas) by leaving it up and making the necessary adjustments for each
cue, or to be made as complete new states for each cue by leaving the cues master down and
making a new state for each recording.
Cue List
A list of timed cues.
To Next Page
Loading...
