System Settings and Setup 69
System Settings and Setup
This section covers the system settings and setup options for your ColorSource console.
The following topics are covered:
Setup 69
Settings 69
Settings: Basic 69
Settings: Times 70
Settings: Independents 71
Settings: Console 71
Settings: Network 72
Settings: Erase 73
Setup
Contains functions used in the setup of the console:
Patch
Settings
Files
Settings
All internal settings and default values are setup here.
Settings are arranged in tabs of related items:
Basic: Operating modes, language, stage map zones, auto-select channel on fader move, and about
console information.
Times: Times for clear, default cue, and default move.
Independents: Independents setup and patching.
Console: Custom setup of console buttons, external monitor, and DMX speed.
Network: Custom setup of your console's network, including network output protocol, OSC set-
tings, and Amigo.
Erase: Erase operations.
Settings: Basic
From this tab you can set the operating mode and language, show zones on the stage map, and select the
fader behavior to auto-select channels.
To Next Page
Loading...
