ETC ColorSource Console - OSC Commands

AV Functions 63
OSC Commands
OSC is a protocol that uses network communication (wired or wireless) to communicate between various
audio, video, and lighting devices, and other devices, such as tablets for remote control of your console.
For configuration information, see Settings: Network (on page72).
The following is a list of the OSCcommands, their variables or arguments, if any, and a description of its
function.
Note: Arguments are shown following an equal sign (=). For OSC, these are not sent as a part
of the OSC string itself, but instead attached as arguments. Configuration will vary depending on
the software you are using.
Command
Variables / Argu-
ments
Description
Buttons
/cs/key/recordsnapshot Records a snapshot of the active state in a memory
/cs/key/recordnextcue Records the active state into the next cue
/cs/key/clearall Clears all the selections, active channels, playbacks and cues
/cs/key/clearplaybacks Clears the active playbacks
/cs/key/clearcues Clears the active cue
/cs/key/clearchannels Clears the active channels
/cs/key/clearselection Clears the user's selected channels
/cs/key/blackout Toggles the blackout state
/cs/key/audiomute Toggles audio mute
/cs/key/videooff Toggles video output
/cs/key/mediapause Pauses or plays media
/cs/key/ind1 Toggles Ind1
/cs/key/ind2 Toggles Ind2
Cue
/cs/playback/go Runs the next cue
/cs/playback/goback Runs the previous cue
/cs/playback/pause Pauses an active cue change
Channels
/cs/chan/select/{x}
x: channel number, no
arguments
Exclusively select channel x
/cs/chan/select=x
x: channel number, 1
integer argument
Exclusively select channel x
/cs/chan/add/{x}
x: channel number, no
arguments
Add channel x to selection
/cs/chan/add=x
x: channel number, 1
integer argument
Add channel x to selection
/cs/chan/subtract/{x}
x: channel number, no
arguments
Remove channel x from selection
/cs/chan/subtract=x
x: channel number, 1
integer argument
Remove channel x from selection
/cs/chan/thru/{x}
x: channel number, no
arguments
Select every channel from the last channel selected 'thru' to chan-
nel x
/cs/chan/thru=x
x: channel number, 1
integer argument
Select every channel from the last channel selected 'thru' to chan-
nel x
Groups
/cs/locationGroup/select/{x}
x: location group number,
no arguments
Selects all the channels in the location group x
/cs/locationGroup/select=x
x: location group num-
ber,1 integer argument
Selects all the channels in the location group x