Showfile Management 79
Functions
Import USB: imports media from an external memory stick. Files must be in a folder called Import
in the root of the USB stick.
Import Show: imports media from another show file.
Delete Media: deletes selected media from your console.
Caution: All data is stored internally in non-volatile memory. Do not switch off the power until
any pending save operation is completed, or you may lose data. It is strongly advised that you
make periodic backups of important data to an external memory stick using the export function.
Import Media
Importing Audio and Image clips.
Use of Media Notice
All media used in a show must be stored locally inside the console.
Media may be imported from an external memory stick.
Only one copy of each media file is needed even if it is used in several shows. However, when a show is
exported to a memory stick, all the included media is also included in the export.
Supported file types
Audio: mp3, aac and wav files (44.1kHz sample rate, 4GB maximum file size)
Image: jpg, png, tiff, and bmp files (1280 x 720 max size)
Note: It is recommended not to use the same name for different items of media. If the media is
exported and then re-imported to the same console or another console, this would cause a local
copy to be over-written.
Functions
Import USB: imports media. The files must be in folder named Import on a FAT32 formatted USB
drive.
Import Show: imports media from another show file.
Delete Media: deletes selected media from your console.
Caution: All data is stored internally in non-volatile memory. Do not switch off the power until
any pending save operation is completed, or you may lose data. It is strongly advised that you
make periodic backups of important data to an external memory stick using the export function.
Delete Media
Delete Audio and Image files saved to your ColorSource AV console by going to Setup>Files>Me-
dia>Delete media.
When the Delete media button is pressed, a screen will display showing the available media files. Select
the desired file, and then press Accept. If you want to leave this display without deleting, press Cancel.
To Next Page
Loading...
