HMG-838PT & HMG-838EPT Web Configuration 2-1
Chapter 2
System
The configuration under the "System" menu includes device settings such as IP address, time server, etc.
2-1 System Information Configuration
The configuration information entered here will be reported in the standard SNMP MIB2 for 'sysContact' (OID
1.3.6.1.2.1.1.4), 'sysName' (OID 1.3.6.1.2.1.1.5) and 'sysLocation' (OID 1.3.6.1.2.1.1.6). Remember to click the “Save”
button after entering the configuration information.
System Contact: Indicate the descriptive contact information. This could be a person’s name, email address or
other descriptions. The allowed string length is 0~255 and the allowed content is the ASCII characters from
32~126.
System Name: Indicate the hostname for this device. Alphabets (A-Z; a-z), digits (0-9) and minus sign (-) can be
used. However, space characters are not allowed. The first character must be an alphabet character. The first and
last character must not be a minus sign. The allowed string length is 0~255.
System Location: Indicate the location of this device. The allowed string length is 0~255.
2-2 System Information
The system information screen will display the configuration information of the system, in System section shows
“Contact”, “Name” and “Location”, the Hardware section shows “MAC Address” and “Hardware Version”, the Time
section shows “System Date” and “System Uptime" and the Software section shows the “Software Version” and
“Software Date”.
To Next Page
Loading...
Need help?
General
