Security
HMG-838PT & HMG-838EPT Web Configuration 5-2
defaults and etc.) need user privilege level 15. Generally, the privilege level 15 can be used for an administrator
account, privilege level 10 for a standard user account and privilege level 5 for a guest account.
5-1.2 Privilege Levels
This page provides an overview of the privilege levels.
Privilege Level Configuration:
Group Name: This name identifies the privilege group. In most cases, a privilege level group consists of a single
module (e.g. LACP, RSTP or QoS), but a few of them contains more than one. The following description defines
these privilege level groups in details:
System: Contact, Name, Location, Timezone, Daylight Saving Time, Log.
Security: Authentication, System Access Management, Port (contains Dot1x port, MAC based and the MAC
Address Limit), ACL, HTTPS, SSH, ARP Inspection, IP source guard.
IP: Everything except 'ping'.
Port: Everything except '
UTP Cable Diagnostics'.
Diagnostics: 'ping' and '
UTP Cable Diagnostics'.
Maintenance: CLI- System Reboot, System Restore Default, System Password, Configuration Save,
Configuration Load and Firmware Load. Web- Users, Privilege Levels and everything in Maintenance.
Privilege Levels: Every group has an authorization Privilege level for the following sub groups:
To Next Page
Loading...
Need help?
General
