Security
HMG-838PT & HMG-838EPT Web Configuration 5-33
Rate Limiter: Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Disabled is
displayed, the rate limiter operation is disabled.
Port Redirect: Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the
port number. The allowed values are Disabled or a specific port number. When Disabled is displayed, the port
redirect operation is disabled.
Mirror: Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored. The default value is "Disabled".
CPU: Forward packet that matched the specific ACE to CPU.
Counter: The counter indicates the number of times the ACE was hit by a frame.
Conflict: Indicate the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to
hardware limitations.
5-2.4 DHCP
5-2.4.1 DHCP Server Statistics
DHCP Server Statistics:
To Next Page
Loading...
Need help?
General
