HMG-838PT & HMG-838EPT Web Configuration 5-1
Chapter 5
Security
Under the Security heading are three major icons, Switch, Network and RADIUS.
5-1 Switch
5-1.1 User
This page provides an overview of the current users. Currently the only way to login as another user on the web server
is to close and reopen the browser.
By default, there is only one user, 'admin', assigned the highest privilege level of 15. Click the entries in User Name
column to edit the existing users. Or click the “Add New User” button to insert a new user entry.
Add User:
User Name: Enter the new user name.
Password: Enter the password for this user account.
Password (again): Retype the password for this user account.
Privilege Level: Select the appropriate privilege level for this user account. The allowed range is 1 to 15. If the
privilege level value is 15, it can access all groups, i.e. that is granted the fully control of the device. But other
values need to refer to each group privilege level. User's privilege should be same or greater than the group
privilege level to have the access of that group. By default setting, most groups’ privilege level 5 has the read-only
access and privilege level 10 has the read-write access. And the system maintenance (software upload, factory