Ethernet Direct Husky HMG-1648P User Manual

HMG-838PT & HMG-838EPT Web Configuration 24-1
Chapter 24
Maintenance
The “Maintenance” menu contains several sub menus. Select the appropriate sub menu to restart the device, set the
device to the factory default or upgrade firmware image.
24-1 Reboot
Reboot Device:
Click “Yes” button to reboot the switch.
24-2 Factory Defaults
Factory Defaults:
 Keep IP: Check the “Keep IP” box if you want to use the current IP settings after restoring to factory default
settings.
Click “Continue” button to reset your device to factory defaults settings. Please note that all changed settings will be
lost. It is recommended that a copy of the current configuration is saved to your local device.
24-3 Software
24-3.1 Upload

Ethernet Direct Husky HMG-1648P Specifications

General

Brand	Ethernet Direct
Model	Husky HMG-1648P
Category	Network Router
Language	English