Security
HMG-838PT & HMG-838EPT Web Configuration 5-49
5-4 TACACS+
TACACS+ Server Configuration:
Global Configuration
Timeout: The time the switch waits for a reply from a TACACS+ server before it retransmits the request.
Deadtime: Deadtime is the period during which the switch will not send new requests to a server that has failed to
respond to a previous request. This will stop the switch from continually trying to contact a server that it has
already determined as dead. Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but only
if more than one server has been configured. The allowed deadtime range is between 0 to 1440 minutes.
Key: Specify the secret key up to 63 characters. This is shared between a TACACS+ sever and the switch.
Server Configuration
Hostname: The hostname or IP address for a TACACS+ server.
Port: The TCP port number to be used on a TACACS+ server for authentication.
Timeout: If timeout value is specified here, it will replace the global timeout value. If you prefer to use the global
value, leave this field blank.
Key: If secret key is specified here, it will replace the global secret key. If you prefer to use the global value, leave
this field blank.
To Next Page
Loading...
Need help?
General
