Security
HMG-838PT & HMG-838EPT Web Configuration 5-46
Auth Port: The UDP port to be used on the RADIUS server for authentication.
Acct Port: The UDP port to be used on the RADIUS server for accounting.
Timeout: If timeout value is specified here, it will replace the global timeout value. If you prefer to use the global
value, leave this field blank.
Retransmit: If retransmit value is specified here, it will replace the global retransmit value. If you prefer to use the
global value, leave this field blank.
Key: If secret key is specified here, it will replace the global secret key. If you prefer to use the global value, leave
this field blank.
5-3.2 RADIUS Overview
RADIUS Authentication Server Status Overview:
#: The number of Authentication & Accounting server. Five Authentication & Accounting servers are supported.
Click on the number to view each server’s details.
IP Address: The configured IP address and UPD port number.
Status: The current state of RADIUS authentication server. Displayed states include the following:
Disabled: This server is disabled.
Not Ready: The server is ready but IP communication is not yet up and running.
Ready: The server is ready and IP communication is not yet up and running. The RADIUS server is ready to
accept access attempts.
5-3.3 RADIUS Details
To Next Page
Loading...
Need help?
General
