HMG-838PT & HMG-838EPT Web Configuration 1-1
Chapter 1
Web Configuration Home
Web-based management provides easy-to-use and straightforward graphic interface for users to configure the device
quickly. The web-based management of this device supports various web browsers such as Internet Explorer (Version
9.0 or above is recommended), Firefox or Google Chrome. To access the web management interface for the first time
or after returning the device back to factory defaults, enter the default IP address of the switch in the browser's location
bar. See below for explanations.
1-1 Entering Web Configuration
To enter the web based management for the first time or after returning the device back to factory defaults, input the
default IP address “192.168.16.1
” in your web browser. Then, a standard login prompt will appear depending on the
type of browser used. The example below is with Chrome browser.
Enter the Ethernet Direct factory default username “admin” with “no password”. After successfully entering the web
based management, the Port State page will appear.
1-2 Port State
The initial page, when logged in, displays a graphical overview of the port status for the electrical and optical ports. The
To Next Page
Loading...
Need help?
General
