EUCHNER MSC - 9.1.6. Menu bar

67
2121331-04-04/19 (Translation of the original operating instructions)
Operating Instructions
Modular Safety Control System MSC
EN
8  PRINT AREA
9  PRINT PROJECT REPORT
10  UNDO (undo last command)
11  REDO (redo last action)
12 
VALIDATE PROJECT
13 
ESTABLISH CONNECTION TO MSCB
14 
SEND PROJECT TO MSC
15 
DISCONNECT FROM MSC
16 
DOWNLOAD EXISTING PROJECT (from MSC)
17  MONITOR I/O – REALTIME STATUS – GRAPHIC
18  MONITOR I/O – REALTIME STATUS – TEXT
19  DOWNLOAD LOG FILE
20  DISPLAY SYSTEM CONFIGURATION
21  DOWNLOAD FAULT MEMORY
22  CLEAR FAULT MEMORY
23  SCHEMATIC SIMULATION
24  GRAPHIC SIMULATION
25  CHANGE PASSWORD
26  ONLINE HELP
27  RESTORE PASSWORD
Figure 41: EUCHNER Safety Designer, default buttons
9.1.6. Menu bar
The menu bar can be deactivated/activated.
Figure 42: EUCHNER Safety Designer, menu bar