EUCHNER MSC - 1 About this Document; Scope; Target Group; Key to Symbols

7
2121331-04-04/19 (Translation of the original operating instructions)
Operating Instructions
Modular Safety Control System MSC
EN
1. About this document
1.1. Scope
These operating instructions are valid for the Modular Safety Control System MSC. These operating instructions and any
brief instructions enclosed form the complete user information for your device.
1.2. Target group
Design engineers and installation planners for safety devices on machines, as well as setup and servicing staff possessing
special expertise in handling safety components.
1.3. Key to symbols
Symbol/depiction Meaning
Printed document
Internet
www
Document is available for download at www.euchner.de
DANGER
WARNING
CAUTION
Safety precautions
Danger of death or severe injuries
Warning about possible injuries
Caution slight injuries possible
NOTICE
Important!
Notice about possible device damage
Important information
Tip! Tip/useful information
1.4. Supplementary documents
The overall documentation for this device consists of the following documents:
Document title (document number) Contents
Operating Instructions Safety Relays and Control Systems MSC
(2121331)
This document
Internet
www
Possibly brief instructions enclosed Item-specific information about deviations or additions
Internet
www
Important!
Always read all documents to gain a complete overview of safe installation, setup and use of the
device. The documents can be downloaded from www.euchner.de. For this purpose enter the doc.
no. in the search box.
1.5. Exclusion of liability and warranty
In case of failure to comply with the conditions for correct use stated above, or if the safety regulations are not followed,
or if any servicing is not performed as required, liability will be excluded and the warranty void.