CP-2116E
Remote Control Panel
Page - 54 Revision 1.2
7.5. LEVEL BUTTON
Figure 7-8: Level Button Display
The Level button when pushed will allow the user to enable or display specific levels for a destination.
This could be an audio level or video level thereby allowing the user to accomplish a Breakaway route.
The screen will display the selected destination for Breakaway.
Figure 7-9: Selecting the Video Button
To enable or disable a level for a destination the user will push the associated level button on the
panel. If a level has been disabled the associated level button will turn Red. The screen will display a
breakaway icon for the destination. If a level has been enabled the associated level buttons will turn
Green for that level. The screen will display a Green X icon for the destination is all levels are enabled.
The level state will not change if the user selects the Back button to return to the Quad Destination
view.
To Next Page
Loading...
