www.cafection.com 800-561-6162
18
DS2212NSA Rev. 1 2023-04
SERVICE & INSTALLATION MANUAL - Symbol
4.3 Unpacking
To remove the unit from the box, carefully cut the straps holding the box in place on the skid.
Remove the top of the packaging, then pull up the unit’s box. Inspect the unit to see if any damage
occurred during shipment.
Some parts and accessories need to be installed on the equipment. Those were placed inside the
accessories box for shipment.
Here is a list of all accessories and parts that should be found in this box.
Provided inside the accessorie box:
1. Internal Waste Bin
2. Machine Keys (2)
3. 3/8" Inlet Fitting
4. 3/8" to 1/4" Elbow Inlet Fitting
5. 3/8" to 3/8" Elbow Inlet Fitting
6. Filter Paper Roll
7. Large Cleaning Brush
8. Small Cleaning Brush
9. Brew Group Turning Tool
10. Brush
11. Microfiber Cloth
12. Identification Stickers for Canisters (6)
13. Quick Start Guide
Optional
14. Plastic Chute Kit (Chute Base and Chute)
Initial Setup
4
3 2 1
6 7 5 8
11109 12
14
Optional
To Next Page
Loading...
Need help?
General
