16 02-2023 6095 00
Chapter 2
Installation
Installation and any subsequent mainte-
nance operation must be carried out when
the machine is live and, therefore, by the
personnel skilled and trained on the use of
the machine as well as aware of the spe-
cic risks such a condition may involve.
The machine is not suitable for outdoor in-
stallation, it must be installed in a dry room
where the temperature remains between 41
°F to 93 °F.
The machine cannot be installed where
water jets are used for cleaning.
While installing the equipment, wear
IPD’s must be suitable for protection
The machine must be installed in a
room where it can be supervised by
trained personnel.
At the time of the installation, it is
necessary to completely sanitise the
water circuits and the parts in contact
bacterium that may have built up during
storage.
.
Fig. 14
1. Door switch
2. Connectivity switch
To Next Page
Loading...
