30 02-2023 6095 00
INSTANT DISPENSING
The dispensing cycles of the various se-
lections are conceived to achieve the best
result in terms of production rate and drink
quality.
Instant drinks are dispensed according to a
recipe with max. 4 ingredients.
Recipes can be modied from the program-
ming menu.
Every single parameter (grams, water
quantity, mixing, ...) can be modied for
each ingredient from the “recipes” function.
The dispensing sequence of every single
ingredient inside a recipe is programmable.
Powder is intermittently dispensed for choc-
olate-based selections and before water for
the selections based on instant coee.
Attention !!!
After modifying the parameters of in-
mixer is properly rinsed without leaving
any powder residue.
DosEr calibratioN
To dispense instant powders properly, set
up the ow rate of every single doser in gr/s
to calculate the grams to be dispensed.
Calibration is carried out from the program-
ming menus.
boilEr tEmpEraturE rEgulatioN
The boiler temperature is controlled by the
software;
The temperature can be directly regulated
from the menu.
cHaNgEs iN tHE sEtup of iNstaNt proD-
ucts
The dose of instant powders and the water
dose can be modied from the menu of
recipes.
To Next Page
Loading...
