02-2023 6095 00 33
SOFTWARE ARCHITECTURE
The equipment requires an operating sys-
tem and the application software for opera-
tion.
Settings / customisations are managed by
the application software.
1
2
3
Fig. 28
1. Operating system
2. Application software
3. Settings / customisations
opEratiNg systEm
The operating system is intended to supply
basic functionalities to manage resources,
communication with peripheral units and to
coordinate the various activities.
The operating system is necessary to
install the application software and use the
equipment.
The update of the operating system
completely deletes the CPU memory,
including the application software, the
settings and customisations made and
statistical data.
applicatioN softwarE
The application software enables the oper-
ator to use the functionalities of the equip-
ment and to change settings through the
graphic interface (GUI).
The application software is unable to work
without the operating system.
The update of the application soft-
ware does not delete the operating sys-
tem as well as the settings / customisa-
tions made.
sEttiNgs aND customisatioNs
The application software enables the op-
erator to set up and customise recipes,
settings and graphic interface.
Settings / customisations also include the
database of the machine congurations
(layout).
These settings can be saved for import and
use on other equipment.
Before using the settings / customi-
software releases of the application
and operating system.
at least, that their release is the same
as the one from which they have been
exported.
Settings / customisations are not com-
patible with previous software releases.
To Next Page
Loading...
