02-2023 6095 00 13
CLEANING THE BREW UNIT
Whenever you ll or at least once a week,
it is recommended to remove any powder
residue from the external parts of the brew
unit, in particular in the area of the coee
funnel, the lters and the scrapers.
Properly disassemble the brew unit cover
and the coee funnel at regular intervals.
To release the coee funnel, just let it slide
to the right.
Wash and rinse disassembled parts care-
fully.
Attention!
It is absolutely necessary to reassem-
ble the cover before setting the ma-
4
1
2
3
Fig. 11
1. Coffee funnel
2. Filters
3. Scraper
4. Unit cover
SUGAR RELEASE
It is necessary to clean the sugar release
device by using hot water at regular inter-
vals on the models intended to dispense
sugar directly in the cup.
Act as follows:
1. lift the flexible lever to release the nozzle
2. release the return spring from the sugar
nozzle
3. extract the pin
4. extract the sugar nozzle;
5. wash and dry carefully
6. after cleaning, reassemble everything in
the reverse order.
Fig. 12
1. Sugar dispensing nozzle
2. Pin
3. Flexible lever
4. Return spring
To Next Page
Loading...
