EVOCA Opera Touch - System; System Data Export; Technical Features Testing

02-2023 6095 00 53
macHiNE iDENtificatioN NumbEr
To enter a numeric code and the name
intended to identify the equipment.
The code can be used to identify the equip-
ment to analyse statistics.
 This information is not saved when a

iNstallatioN DatE
To set up the installation date of the equip-
ment.
Press  to set up the date.
 The date is used to manage and
schedule maintenance intervals and/or
automatic wash / rinse cycles.
tEcHNical support coNtacts
To enter the technical support details
(name and phone number) for contact in
case of malfunction.
This information will be displayed in case of
malfunction.
You can decide whether to display the infor-
mation with the failures locking the equip-
ment or with the failures not locking the
equipment or with the failures that can not
be reset in normal operation mode.
Press  to modify contact details.
ENERGY SAVING
You can enable, modify the parameters and
set up the energy saving time bands for the
equipment from the energy saving function.
sEttiNgs
To enable / disable the energy saving func-
tionality.
The equipment enables the operator to
manage various energy saving proles.
Some parameters of every single energy
saving prole can be customised.
“Normal” profilE
It is a “short-cut” for the settings intended to
regulate the operation temperature of the
boiler.
“soft moDE” profilE
This prole enables energy saving after a
shut-down period of the equipment.
Upon request for a selection, the machine
quits the energy saving mode.
You can:
-set up after how many minutes of shut-
down energy saving is activated for the
equipment.
-set up the holding temperature of the
boiler/s in the energy saving phase
-enable / disable the lighting of the equip-
ment
-choose the luminosity level of the touch
screen among those pre-defined.