EVOCA Opera Touch - Energy Saving Profiles

02-2023 6095 00 45
playlist
To create and manage playlists of enter-
tainment contents.
A playlist includes videos and/or sequenc-
es of images reproduced while the selec-
tion is being dispensed.
Press  to add videos or images to the
playlist.
Press  to create a copy of the playlist.
Press  to remove the playlist.
A new playlist must be necessarily as-
signed a name.
The contents of the playlist can be repro-
duced in a: random  or cyclic way 
 For a playlist consisting of images only,
you can specify after how long (in seconds)
to display the next image.
tExt mEssagE aND rss fEEDs
You can display rss feed (news) and weath-
er forecasts in normal operation mode and
while the selection is being dispensed.
Please connect the equipment with the
Internet to display news and weather fore-
casts.
fEED / tExt
The equipment is set up by default to dis-
play xed text messages (equipment not
Internet-connected).
Create and enter the texts you wish to show
in normal operation mode.
Enable the network connection to display
news by using an rss fEEd.
 An rss fEEd is intended to display short
news during normal operation.
Choose the rss fEEd address among those
pre-defined or enter a customised address.
sEttiNgs of iNput sENsors
The group of functions is intended to set up
the operation of some sensors of the equip-
ment.
lEvEl of caNistErs
To enable / disable the level control of can-
isters.
 The level of canisters is calculated. The
product quantity used in the recipe is sub-
tracted from the canister capacity for each
selection you have made.
 For a correct management specify the
product quantity you have loaded in the
canister (whenever you load products).
To display the various canisters with lling
levels and modiable parameters:
-Calculated quantity: enable the counter
managing the pre-alarms of “ending prod-
uct”
-Total capacity: set up the grams of the
maximum canister capacity
-Threshold value: set up the grams of the
pre-alarm threshold
cup sENsor
Models with “cup sensor” only (photocell).
The cup sensor can be enabled / disabled
for all selections.
Moreover, you can establish whether - after
two attempts at releasing the cup and if the
photocell
has detected no object in the dispensing
compartment - the failure shall:
-lock the machine (locking failure)
or
-let it run for operation with the user’s cup
(non-locking failure).