66 02-2023 6095 00
CONNECTIVITY
Email sEttiNgs
The equipment can send notices of events
and failures (by email).
To send notices by email, please
and arrange an SMTP outgoing mail
server with an active email account.
An outgoing mail server (SMTP: Simple
Mail Transfer Protocol) is a server intended
to send emails.
The equipment sends notices by
email. It is impossible to receive emails
on the equipment.
Enable the function to set up the parame-
ters to send the emails and email address-
es, i.e. the recipients of notices.
The parameters vary according to the
SMTP server in use (provider of email ser-
vices on the Internet or email server on the
internal or proprietary LAN network).
The equipment is intended to supply a
series of parameters pre-congured for the
main providers of email services on the
Internet.
It remains possible to manually enter email
parameters for the other providers of email
services on the Internet or for email servers
on the internal or proprietary LAN network
(custom).
For the servers on the internal LAN
-
suitable parameter.
For the providers of email services
on the Internet apply to the support or
to the customer care services of the
email parameters in use.
You can enter and delete the email ad-
dresses to which to send notices.
After setting the parameters, you can send
a test email to check the correct congura-
tion thereof.
sEttiNgs
Enable the sending of emails (ON/OFF) to
be able to enter conguration parameters.
enter:
-the sender of messages sending the
equipment, e.g. Vending Machine.
-The name of the SMTP (Simple Mail
Transfer Protocol) outgoing server, e.g.
smtp.example.com.
-The port number used by the outgoing
mail server. Common port numbers are
25, 465 and 587.
-enable the parameter "Authentication
required" to enter the SMTP password.
Authentication is necessary to enable the
user to send the email.
Enter the SMTP user: the sender’s email
address, e.g. vendingmachine@domain.
com and the relative password.
Use "Display password" to display the
password you have typed in clear text.
-specify whether the outgoing mail server is
using the SMTPS safe connection or not.
-add the recipients’ email addresses and
select which type of email to receive
(alerts of events, failures, failures solved,
…)
The equipment is intended to supply a
series of email parameters pre-congured
for the main providers of email services on
the Internet.
If you wish to use email services other than
those pre-congured from the drop-down
menu, choose“custom”.
alErt NoticEs of EvENts
Enable the events for which you wish to
receive a notice (e.g. access to menus,
sanitising operations,…)
alErt NoticEs of failurEs
Enable the failures for which you wish to re-
ceive a notice (e.g. no coee, no water,…)
NoticEs of EvaDts
To schedule the sending of emails with the
data in the EVADTS format.
To Next Page
Loading...
Need help?
General
