EasyManua.ls Logo

EVOCA Opera Touch - Payment Systems

Default Icon
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
02-2023 6095 00 55
PAYMENT SYSTEMS
protocol
gENEral sEttiNgs
immEDiatE cHaNgE
The amount relative to a selection is gener-
ally cashed after the machine has sent the
“Successful selection” signal.
If you enable this function, which is disa-
bled by default, the cash signal is sent at
the start of the dispensing cycle.
DEcimal poiNt positioN
To set up the decimal point position, i.e.:
0: decimal point disabled
1: one decimal digit after the point (XXX.X)
2: two decimal digits after the point (XX.XX)
3: three decimal digits after the point
(X.XXX)
multi-vEND
Used to set the operation mode by multiple
or single dispensing. In case of multiple
dispensing, the change is not automatically
given at the end of a successful delivery,
but the credit will remain available for fur-
ther dispensing. If you press the coin return
button, the remaining credit will be returned
if its value is lower than the maximum
change value.
obligatioN to buy
To enable/disable the operation of the coin
return button before dispensing a product.
-ON: the change is returned after having
selected a product
-OFF: the change is returned just after hav-
ing pressed the coin return key (the ma-
chine is acting as a coin changer)
bookiNg timE
To set up for the cash payment how long
to display the residual credit necessary to
dispense the selection.
valiDator
DEcimal poiNt positioN
To set up the decimal point position, i.e.:
0: decimal point disabled
1: one decimal digit after the point (XXX.X)
2: two decimal digits after the point (XX.XX)
3: three decimal digits after the point
(X.XXX)
ovErpay ENablE
You can decide whether:
-to cash any credit exceeding the selection
amount after a well-defined time interval
(ON overpay credit cleared)
-keep and leave any credit exceeding the
selection amount for the next selection
(OFF overpay credit kept).
ovErpay timEout
To set up after how long to release or cash
the credit with no request for a selection.
valuE of valiDator liNEs
To set up the value of the 6 validator coin
lines (from A to F).

Table of Contents

Related product manuals