02-2023 6095 00 1
Introduction
The technical documentation supplied
is an integral part of the equipment and
it must therefore accompany the equip-
ment whenever it is either moved or
transferred to enable the various opera-
tors to consult it.
Before starting to install and use the ma-
chine, it is necessary to carefully read and
understand the content of the documenta-
tion since it can supply important informa-
tion on installation safety, utilisation rules
and maintenance operations.
The manual is divided into tree chap-
ters.
The is intended to describe
the ordinary lling and cleaning operations
that shall be carried out in areas of the ma-
chine that can be accessed with the simple
use of the door key, without using any other
tool.
The second chapter contains the instruc-
tions for correct installation as well as the
information necessary for optimal utilisation
of the machine performance.
The third chapter is intended to describe
the maintenance operations involving the
use of tools for access to potentially dan-
gerous areas.
The operations described in the second
and third chapter must be carried out
only by the personnel who have a spe-
-
tion from the point of view of electric
safety and health rules.
TRANSPORT AND STORAGE
traNsport
To avoid any damage to the equipment and
any injury to the people, the equipment
must be handled with great care.
While handling, there is the danger of
crushing one's hands and/or feet: never
shoes.
Handle the equipment by using lifting
means suitable for the size and the
weight of the equipment (e.g. lifting
Lifting means may only be used by per-
Please avoid:
-overturning and/or tilting the equipment;
-dragging or lifting the equipment by means
of ropes or alike;
-lifting the equipment by its sides;
-shaking or impacting the equipment and
its package.
storagE
The storage area must be dry and its tem-
perature lie between 32 and 104 °F
If the equipment should freeze, condition it
at a temperature between 32° and 104 °F.
Wait for the temperature of the equipment
to adjust to the room temperature before
powering it on.
Before powering on the equipment, please
wait for the humidity condensate (if any) to
dry completely.
To Next Page
Loading...
Need help?
General
