02-2023 6095 00 29
The coee dose and water quantity being
the same, the grinding degree will directly
aect the brew time.
The automatic grinding regulation system
will act to align the actual time with the one
set up.
The change in the grinding degree is a
result of a change in the brew time; grinding
wheels will gradually approach (ner granu-
lometry) to avoid compressing coee.
During the normal operation of the ma-
chine, you can keep the optimal regulation
of the grinding degree by constantly moni-
toring the brew time.
grinding degree is perceived after some
selections.
After the regulation has become stable,
please also check the ground coee quan-
tity that can slightly change.
DEactivatioN of automatic rEgulatioN
You can disable the operation of the auto-
matic regulation from the machine settings
for whatever reason it might be necessary.
The grinding wheels remain at the distance
reached at the time when you disable the
operation of the automatic regulator.
motor-DrivEN rEgulatioN of griNDiNg wHEEls
If you should change the distance to a con-
siderable extent for any reason whatsoever,
e.g. in order to service the grinding wheels,
you can act manually by setting the change
you wish via software.
This value is expressed in 1/6 of a turn of
the grinding wheel ring nut.
To increase granulometry (coarser grind-
ing), the automatic regulation occurs in one
single operation;
To decrease granulometry (ner grinding),
the automatic regulation occurs when the
coee grinder motor is operating.
release to avoid clogging the brew unit.
To Next Page
Loading...
