64 02-2023 6095 00
usErs’ profilEs
You can enable / disable the use of some
programming functions by using access
proles.
An access prole makes sure that only the
prole-related functions can be used.
Ever single user prole has a password for
access.
The passwords by default are:
-Technician (4444),
-Vending machine (3333),
-Filler (2222)
-User (1111)
Advanced programming functionalities
must be reserved only to people having
a specific
From the function you can change the
password for access to each user profile;.
NEtwork
Ethernet and Wi-Fi congurations vary ac-
cording to the network you wish to connect
the equipment with and the network protec-
tions in use.
-
-
nection of the equipment.
The equipment can support the TCP/IP
protocol.
It is not possible to enable Ethernet and
Wi-Fi connections at the same time.
The conguration of the data connection
on cellular network varies according to the
phone operator you have chosen.
Apply to the phone operator you
suitable for data connection
EtHErNEt
Enable the Ethernet connection to cong-
ure the equipment for the LAN network.
1. Set up the network parameters (e.g. IP
address, …) automatically (DHCP to
ON) or manually (DHCP to OFF)
A DHCP server must be arranged on
-
rameters automatically.
If you decide to set up parameters manu-
ally, please enter:
-the IP address you wish to assign to the
equipment
-the subnet mask including the IP address
-the IP address of the gateway (router)
-the IP address of the domain name server
(DNS server)
-
eters manually or using an IP address
-
vents the equipment from communicat-
Use the function to check if the network
connection is working.
The MAC address is a univocal address
assigned by the producer and intended
to identify the network board of the equip-
ment.
The MAC address can not be modied.
To Next Page
Loading...
