EVS Multicam LSM - Playlist Display; Setting Default Video and Audio Transitions

Issue
10.01.F
EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
110
In Playlist Edit mode the LCD screen will now display additional functions:
11.12.2 PLAYLIST DISPLAY
Additional information will be display on the output monitor as well:
11.12.3 SETTING DEFAULT VIDEO AND AUDIO TRANSITIONS
GENERAL USE
This is possible to set a default value for the video and audio transitions in
the Setup Menu. Once this is defined, each time a clip is entered or inserted
into a playlist, transitions are applied with the the default values.
The Vid. Effect duration setting is on page 4.1, function key F1 (range up
to 20:00 secs).
The Aud. Effect duration setting is on page 4.1, function key F2 (range
“Lock to video”, then up to 20:00secs).
Left 00:00:00:00.
00:00:00:00
111A/03
100
00:00:00
1/5
Duration of the current clip
(Min:Sec:Fr)
Speed
Timecode
& Cli
p
Countdown
Timecode
Current clip /
total clips in Playlist
*Pl.15*
Plist Duration
(Countdown)
Playlist #
V.Mix 00:00
A.Mix 00:00
IN-00:00:00
Playback speed
Spd 100
A.Del 00:00
OUT+00:00:00
A
udio Delay
OUT point
Video Effect type
& duration
Audio Effect duration
IN point
PL11 LSM01 Paola LOC TDUR=00:00:02:22
111A/04 Clipname0123 00:00:29 Unk W00:10
112B Clipname4567 00:53:29 Unk W00:10
112B/02 Clipname8910 00:53:29 Unk W00:10
V Base A Base Effect Edit all
Insert Speed FX Dur Delete