EVS Multicam LSM Operating Manual

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
111
U SE WITH S PLIT AUDIO
The simplest type of Split Audio edit that can be performed on an LSM is to
make the video and audio transitions at the beginning of the clip have
different durations, such as a 12 Frame Video Mix with a 2 sec Audio
crossfade.
The value of the Audio Effect Duration parameter of the Setup menu (p.
4.1, F2 key) is only taken into account when the Split Audio mode is
enabled. Otherwise, the audio effect duration is always locked to the video
effect duration, whatever the value of these parameters.
If the Audio Effect Duration parameter in the setup is set to ‘Lock to video’,
it will never be possible to adjust independently the duration of the audio
and video transitions. If you want to adjust one of these transitions and the
other one follows, please check the Audio Effect Duration in the setup, and
make sure it is NOT set to “Lock to Video”.
11.12.4 EXAMPLE OF TRANSITION EFFECTS
N ORMAL P LAYLIST WITH C UTS

EVS Multicam LSM Specifications

General

Brand	EVS
Model	Multicam LSM
Category	Remote Control
Language	English