EVS Multicam LSM Operating Manual

EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
89
11.3.2 VGA PLAYLIST SCREEN
INTRODUCTION
Pressing F10 on the keyboard calls the VGA Playlist screen. The Playlist
screen displays information on the clips included in the current or loaded
playlist. Several transport functions are available from this screen. For more
information, refer to section 11.9.2 ‘Functions Available from the VGA
Pl
aylist Screen’, on page 102.
DISPLAY DEPENDING ON THE LOAD PLAYLIST SETTING
When the Load Playlist setting (P4.2, F5) is set to ‘Conditional’ in the Setup
menu on the Remote Panel, the information displayed on the VGA Playlist
Screen will differ depending on whether a playlist is loaded on the PGM1 or
not:
If a playlist is loaded on the PGM1:
• All the information displayed on the Playlist Screen refers to the loaded
playlist.
• The Play, Skip, Next and Recue commands and displayed on the blue-
highlighted section at the bottom of the page.

EVS Multicam LSM Specifications

General

Brand	EVS
Model	Multicam LSM
Category	Remote Control
Language	English