To Next Page

To Previous Page

EVS Multicam Version 10.01 – Operating Manual

EVS Broadcast Equipment SA – July 2009

Issue

10.01.F

6.1.2 OPERATIONAL MENU

Rst Cam Local Sync Prv 2nd CTRL

Cam A Cam B Cam C Cam D

CAM A/ B /C /D

This parameter allows selecting the camera on the PGM output if PRV CTL

is OFF and on PRV output if PRV CTL is ON.

Note

In 5CAM configuration (5 recorder channels and 1 player channel)

or when loading a clip where CAM E or F exists, the operational

menu will display:

Rst Cam Local Sync Prv 2nd CTRL

Cam A Cam B Cam C --->

By pressing the D key (--->), the operator has access to the D, E and F

cameras. The operation menu becomes:

Rst Cam Local Sync Prv 2nd CTRL

Cam D Cam E Cam F <---

Press the D key (<---) to return to CAM A, B, C selection.

RST CAM

This function restores the position of cameras on the active channels: CAM

A on PGM1, CAM B on PRV.

Note

When a clip/playlist is loaded on a channel, switching back to Live

mode will recall the record train, which was last used on that

output. This avoids too frequent uses of the RST CAM function.

Other manuals for EVS Multicam LSM

Questions and Answers:

Need help?

Do you have a question about the EVS Multicam LSM and is the answer not in the manual?

General