EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
161
16.5 CUE POINTS RELATED TO OFFSIDE
SEQUENCE
When an offside sequence is created, a cue point is automatically defined on
two positions:
• The position where the offside line is defined.
• The position corresponding to the preroll before the outside sequence.
When the offside mode is active, the user can press Last Cue to find back
one of these cues related to the offside sequences. Once you have reached
the first cue in the train or clip and press again on Last Cue, you come back
to the last cue.
To Next Page
Loading...
