EVS Multicam Version 10.01 – Operating Manual
EVS Broadcast Equipment SA – July 2009
Issue
10.01.F
51
9.3.2 THE TITLE BAR
The Title bar contains the status information:
• Number and name of the server currently selected for clips and for
record trains (*). The name is blinking red if it is a network machine.
• Total number of clips (i.e. protects, 1 camera angle counting for 1 clip in
this count)
• Total duration of all clips
• Remaining capacity on the server (all record trains together; valid for
local server only)
Note
The abbreviated word “(Loc.)” appears next to the name if the
local machine is currently selected for clips and/or for record
trains. The clips displayed in the clip screen belong to this
machine.
9.3.3 THE FUNCTION BAR
The second line displays the available functions. Each function can be
called by the corresponding F_ key of the keyboard, or by clicking with
stylus & tablet on the corresponding area on this line.
F1: NAME
This function is used to name a clip. For more information on how to name a
clip in the VGA, refer to the section 9.3.6 ‘How to Name a Clip’, on page 56.
F2: CLIP/CAM
This function toggles between CLIP mode and CAM mode.
• In CLIP mode, actions on a clip will use all available cameras for this
clip.
• In CAM mode, actions on a clip will only use the selected camera for this
clip.
Other functions such as Name, Delete, Copy, Set TC, >Archive depend on
this mode selection.
F3: CALL
The operator can gain immediate access to a local or network clip by typing
its ID number.
F4: PREF
This option changes the primary camera of a clip. For information on how to
To Next Page
Loading...
Need help?
General
